{"id":380,"date":"2018-08-24T17:12:52","date_gmt":"2018-08-24T17:12:52","guid":{"rendered":"https:\/\/cyflexdoc.wpengine.com\/?page_id=380"},"modified":"2025-03-05T12:17:08","modified_gmt":"2025-03-05T17:17:08","slug":"test-manager-keywords","status":"publish","type":"page","link":"https:\/\/cyflex.com\/index.php\/cyflex-manuals\/test-manager-keywords\/","title":{"rendered":"Test Manager Keywords"},"content":{"rendered":"
@AK_COMMAND-Send Command to AK Device <\/a>
\n @AKSYNC-Send Command to Asynchronous AK Device <\/a>
\n @AKSYNC_ACTIONS-Specify when to Send AKSYNC Command Failure <\/a>
\n @AKSYNC_RESTART-End and Restart AKSYNC Collector Task <\/a>
\n @ASAM3_ACTIONS-Communicate with CUTY System via TCP-IP<\/a>
\n @ASAM3_GET-Read Variable Value from ECM via CUTY<\/a>
\n @ASC-Send Command to Asynchronous Device<\/a>
\n @AUXILIARY_TASK-Launch Special Support Task<\/a>
\n@BACKGROUND-Run Computed Command in the Background<\/a>
\n@BACKGROUND_PRIORITY-Set Priority Value in the Background<\/a>
\n@BACKGROUND_TASK-Run Command or Task in the Background<\/a>
\n @CONTROL_TOLERANCE-Specify Control Variable Tolerance <\/a>
\n @CREATE_EVENT-Create Event for gp_test <\/a>
\n @CREATE_EXPRESSION -Create Computed Expression for gp_test <\/a>
\n @CREATE_TRANSITION_EVENTS-Create Transition Event for gp_test <\/a>
\n @CREATE_VAR-Create CyFlex variable in gp_test<\/a>
\n @CYBER-Change Operating Parameters of Cyber Application <\/a>
\n @CYBER_ACTIONS-Set execution paths for CYBER commands <\/a>
\n @DEVCOM-Specify Communication Parameters for Smart Device <\/a>
\n @DEVCOM_ACTIONS-Communicate with Smart Device using AK Protocol <\/a>
\n @DYNO-Specify Dyno Controller Mode and open_loop Position <\/a>
\n @ELSE_MODE-Specify Alternate Mode or Procedure to Execute (@ELSE_MODE) <\/a>
\n @EMAIL-Send Email or Pager Message <\/a>
\n @ENGINE_CONTROL_MODE-Specify Method of Engine & Dyno Control <\/a>
\n @FEED_FORWARD- Specify Controller Feed-forward Characteristics<\/a>
\n @FR_LOG_FILE-Specify Data File for Logging Fuel Readings <\/a>
\n @FUEL_READING-Initiate Fuel Readings for PAM datapoint <\/a>
\n @FUEL_READING_STATS-Take Fuel Samples until Criteria Met <\/a>
\n @FUEL_READING_SYNC-Synchronize Processes to Generate PAM Datapoint <\/a>
\n @GET_FF_GAIN-Get Value of Feed-forward Gain <\/a>
\n @GET_PID_GAINS-Get Value of PID Gains and Store in Real Variables <\/a>
\n @IF_FALSE-Variables or Expressions Required as FALSE to Execute Mode <\/a>
\n @IF_TRUE-Variables or Expressions Required as TRUE to Execute Mode <\/a>
\n @LIMIT_SPECS-Set Limit for Terminating Mode <\/a>
\n @LIMIT_SPECS_ALL-Set Limits Required Simultaneously to Terminate Mode <\/a>
\n @LOOP_CONTROL-Specify a Repetitive Loop Operation <\/a>
\n @MODE-Specify Mode Number, Time, Next Mode and Description <\/a>
\n @NO_RUN_PROCEDURE-Read Procedure into Memory before Executing <\/a>
\n @OTHER_CTRL_VAR-Specify Reference Value as Control Variable Target <\/a>
\n @OUT_CHAN_CONFIG-Reconfigure Control Output Channel <\/a>
\n @PAM_DATAPOINT-Create PAM Datapoint without Forcing Fuel Reading <\/a>
\n @PAM_GROUP_LIST-Tag a Datapoint as a Member of a Group <\/a>
\n @PARAMETERS-Modify CyFLex Variables
\n<\/a>@PATH_OPTIONS- Variables or Executables Required as TRUE to Execute Mode<\/a>
\n @PID_GAINS-Modify PID Controller Gain <\/a>
\n @PROCEDURE-Jump To Sub-procedure <\/a>
\n @RAMP-Ramp A Variable <\/a>
\n @RAMP_DYNAMIC-Ramp A Variable <\/a>
\n @SET_DISPLAY_STATUS-Change Variable Color <\/a>
\n @SET_EVENTS-Send Event Messages <\/a>
\n @SPAWN_CO_PROCESS-Start An Application <\/a>
\n @SPEED-Set Engine Speed Target <\/a>
\n @STABILITY-Stability Specifications <\/a>
\n @SWITCH-Switch Mode Based on Index <\/a>
\n @TERM_ALL_EVENTS-Terminate Mode <\/a>
\n @TERMINATION_EVENTS-Terminate Mode <\/a>
\n @TEST_CYCLE_END-End Test By Cycle Count <\/a>
\n @TEST_TABLE-Read Variable Values <\/a>
\n @THROTTLE-Set Throttle Position <\/a>
\n @TORQUE-Set Engine Torque <\/a>
\n @UNICO commands <\/a>
\n @USER_LOOP-Send control loop commands <\/a>
\n @VZ_CONFIG-Virtual Zeroing <\/a>
\n @WRITE_VALUES-Write To a File <\/a><\/h5>\n","protected":false},"excerpt":{"rendered":"

@AK_COMMAND-Send Command to AK Device @AKSYNC-Send Command to Asynchronous AK Device @AKSYNC_ACTIONS-Specify when to Send AKSYNC Command Failure @AKSYNC_RESTART-End and Restart AKSYNC Collector Task @ASAM3_ACTIONS-Communicate with CUTY System via TCP-IP @ASAM3_GET-Read Variable Value from ECM via CUTY @ASC-Send Command to Asynchronous Device @AUXILIARY_TASK-Launch Special Support Task @BACKGROUND-Run Computed Command in the Background @BACKGROUND_PRIORITY-Set Priority Value […]<\/p>\n","protected":false},"author":47,"featured_media":0,"parent":249,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-380","page","type-page","status-publish","hentry"],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/pages\/380","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/users\/47"}],"replies":[{"embeddable":true,"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/comments?post=380"}],"version-history":[{"count":0,"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/pages\/380\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/pages\/249"}],"wp:attachment":[{"href":"https:\/\/cyflex.com\/index.php\/wp-json\/wp\/v2\/media?parent=380"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}