A new database has been added called DARTS, and the 6.3.x versions of CyFlex have new tasks to communicate with the DARTS database. The DARTS database replaces the PAM database with new and improved features for better data acquisition outside of CyFlex. The purpose of DARTS database is to address some long-time user needs which have been exceedingly difficult to address within PAM.<\/p>\n
Most tasks that were associated with PAM have a new version for DARTS. Below are some of the old tasks in PAM, and what there is now for DARTS:<\/p>\n
PAM Task Names\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 DARTS Task Names Once the test cell is ready to be converted from PAM to DARTS, ‘ There is also a new ‘
\ndatapoint \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 =>\u00a0 darts_datapoint<\/code>
\nsetPAMtestid\u00a0\u00a0\u00a0\u00a0\u00a0 =>\u00a0 setDARTStestid<\/code>
\nsetPAMpoint\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 =>\u00a0 setDARTSpoint<\/code>
\npam_specs\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 =>\u00a0 darts_specs<\/code>
\npamStatus\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 =>\u00a0 dartsStatus<\/code>
\npamResend\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 =>\u00a0 dartsResend<\/code>
\nchangeKeyword\u00a0\u00a0\u00a0\u00a0 =>\u00a0 changeDartsKeyword<\/code>
\nchangeTestidPtAll =>\u00a0 changeDartsTestidPtAll<\/code>
\nPAMheader\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 => \u00a0<\/code><\/strong>No equivalent, no longer needed as header information is in the datapoint file now<\/code>
\n<\/strong><\/p>\npam_specs<\/code>‘ and ‘PAMheader<\/code>‘ should be removed from the go.scp file and the ‘datapoint<\/code>‘ task must be replaced with ‘darts_datapoint<\/code>‘ in the go.scp file. Along with replacing ‘datapoint<\/code>‘ with ‘darts_datapoint<\/code>‘, there are spec file changes.\u00a0 The ‘\/specs\/pam_specs.xxx<\/code>‘ file should be converted to a new ‘\/specs\/darts_specs.xxx<\/code>‘ file. For more information on converting the spec file, you can view Converting from PAM to DARTS<\/a>.<\/p>\nlogger<\/code>‘ task called ‘dlogger<\/code>‘ that can send ‘logger<\/code>‘ information to the DARTS system using a CyFlex external data manager service which may prove useful for many users. ‘dlogger<\/code>‘ also has a new GUI with it called ‘dloggereditor<\/code>‘ that can set up the spec file easily before running ‘dlogger<\/code>‘. For additional information about the ‘dlogger<\/code>‘ and ‘dloggereditor<\/code>‘ tasks, you can view Logging Data Using dlogger<\/a><\/p>\n