13: Cell Utilization
| Command | Purpose |
|---|---|
| allcells | Generate a facility wide utilization report. |
| allcells3 | Generate a report for all test cells, including the time since each cell was last running, 7-day utilization, 24-hour utilization, and the number of hours run on the first shift and off shifts combined. |
| allcells5 | Generate utilization reports for all test cells, accounting for engine changes and various time intervals |
| allcells_fuel | Generate a report on fuel utilization for all test cells based on specified time intervals and formats. |
| allmet | Generate a facility-wide utilization report for test cells based on specified time intervals and report formats. |
| allMTC | Generate utilization reports for all test cells, calculating and displaying metrics such as total run hours, utilization percentages, fuel usage, and breakdowns by shift and weekend based on meter log data. |
| alloc_sig |
Allocate a shared memory area for signal variables. |
| allwork | Generate reports on test cell power generation and utilization based on specified time intervals and formats. |
| all_sites_info |
Use this utility to gather and report CyFlex configuration information from multiple sites, including versions, hostnames, IP addresses, and Linux versions, then outputs the data to STDOUT and creates a CSV file at /data/siteInfo.csv. |
| gp_utl | Generate a utilization report for a specified test cell based on selected time intervals. |
| hrmeter | Update the hour meter value for a specified test cell in the CyFlex system. |
| kw_report |
Generate a report of test cell utilization including motoring and absorbing power based on specified time intervals. |
| metrlogall |
Continuously log hour meter and total fuel readings for all test cells at specified intervals for utilization monitoring. |
| metrlogcell |
Monitor and log utilization events for CyFlex test cells, writing data to meterlog and occ.log files based on received events. |
| msu_clear_states | Set specified MSU states to inactive. |
| msu_set | Set or reset cell states based on provided keys, specifying whether to turn the state on or off, and optionally setting a priority for the state. |
| occ_start | Use this command to indicate that an engine has been installed in a test cell, to set the installation as valid and initialize occupancy tracking. |
| parse_meterlog |
Parse meterlog files to extract and organize data into separate files based on the year derived from timestamps. |
| PPNs | Generate reports summarizing CVS activities including details of each activity, computed costs, and summaries by program project number. |
| select_group | Select an engine group from a menu and set the selected group in shared memory for CyFlex. |
| select_model | Select a valid engine model from a menu and set the selected model in shared memory. |
| select_type | Select a valid test type from a menu and update it in the system. |
| select_vpi | Select a valid VPI phase and set it in shared memory. |
| set_meter | Set the meter value for engine test hours in the CyFlex system. Requires superuser authority. |
| sevenday | Generate a facility-wide utilization report for the specified number of weeks using the given time interval. |
| seven_daymet | Compute and update 7-day utilization information for cells based on meter logs. |
| seven_day_util | Compute running 7-day utilization information based on meter data. |
| start_cold_soak_period | Set the MSU “Cold_Soak” state to ON and then go to sleep for a specified number of minutes, after which it will set the state OFF. |
| ytd_report | Generate a year-to-date utilization report for test cells based on specified weekly intervals. |