dy

Put the dyno controller in open loop mode with a specified OPEN_LOOP target.

Enter:

dy <target> [ramp_rate]

Where:

target	Specify the OPEN_LOOP target value for the dyno controller.
ramp_rate	Optional. Specify the rate at which the dyno command should be ramped from its current value to the new target.

Example:

dy 50
The above command puts the dyno controller in OPEN_LOOP mode and immediately sets the dyno command to 50%.

dy 75 20
The above command puts the dyno controller in open loop mode and sets the target value to 75%.
The open loop dyno command will ramp from the current value to the target value at the rate of 20% per second.

Notes:

 

See Also:

sp, to, th, th_ramp, dy_ramp, CyFlex Engine Controls