eng_ctrl_specs
Purpose:
-
Specify the engine control task configuration.
Enter:
-
eng_ctrl_specs [engine_control_spec_file]
Where:
-
engine_control_spec_file
Optional. Specify the specification filename to configure the engine control task. Default: eng_ctrl_specs.NNN
Example:
-
eng_ctrl_specs
The above command configures eng_ctrl_task with the default eng_ctrl_specs file. Assuming that the command is executed at test cell NNN, the default file is /specs/eng_ctrl_specs.NNN.eng_ctrl_specs /specs/my_eng_ctrl_specs
The above command results in the file /specs/my_eng_ctrl_specs being processed.
Notes:
-
If eng_ctrl_task is not already running, it will be automatically started with a priority of 16, FAS rate, and set as a critical task.
Use the ‘errs’ command to check for errors after using this command.
All “expressions” that define inputs must be 79 characters or less.