th

Put the throttle controller in open loop mode with a specified OPEN_LOOP target.

Enter:

th <target> [ramp_rate]

Where:

target	Specify the OPEN_LOOP target value for the throttle controller.
ramp_rate	Optional. Specify the rate at which the throttle command should be ramped from the current value to the new target.

Example:

th 50
The above command puts the throttle controller to OPEN_LOOP mode and immediately sets the throttle command to 50%.

th 75 10
The above command puts the throttle controller in open loop mode and sets the target to 75%.
The open loop throttle command will ramp from the current value to the target value at the rate of 10% per second..

Notes:

 

See Also:

to, sp, th_ramp, dy, dy_ramp, CyFlex Engine Controls