9: Data Collection Data Logging

Command	Purpose
ave_trv_log	Calculate and report the average TRV values for specified cell numbers within a group for a specified time interval.
changeDartsKeyword	Change a Keyword of the DARTS Datapoint file in the current directory.
changeDartsTestid	Change the Test ID and/or Datapoint of the DARTS Datapoint file in the current directory.
changeDartsUnits	Change Units of DARTS Datapoint file in the current directory.
changeKeyword	Change a Keyword of the PAM Datapoint file in the current directory.
changeLine	Change a string in a line of the PAM Datapoint file in the current directory.
changeTestid	Change a Test ID and/or a Datapoint of the PAM Datapoint file in the current directory.
changeTestidPtAll	Change a Test ID and/or a datapoint of PAM Datapoint file(s) in the current directory.
changeUnits	Change Units of a PAM Datapoint file in the current directory.
chk_loger	Read a federal smoke floger file and verify the critical entries.
cls_analysis	Analyze CLS data
cls_converter	Convert a specified data file to have one header line, one unit line, and one test information line.
cls_load_spc	Load SPC variables into memory for use in a pass/fail criteria file.
dartsAgeSite	Monitor the file age of files within the hold and ready directories of the specified directory on the central node. An email is sent to sysop to notify them of the old files. A copy of the old files is attached to the email.
dartsResend	Resend DARTS datapoints to database.
dartsResendSite	Resend DARTS datapoints to database from a site.
dartsStatus	Get a summary of datapoints transferred and in hold.
dartsStatusSite	Get a summary of datapoints transferred and in hold.
datapoint	Control the sequencing and reporting of various channel measurements.
delta_hst	Delta/Compressed History
delta_specs	Delta History Events Specifications
delta_split	Extract and store variables from a *.hst file.
delta_split_all	Split the *.hst files that fall within the current time window specified by the “hst_window” variable.
demux	This is the mainline of the task which computes the air mass flow on a continuous basis.
depends	Print the header dependencies associated with the given header file.
dlogger	Start a fast Data Storage, Analysis and Reporting System (DARTS) data logging operation.
dloggereditor	Start the dloggereditor.
fedSmokeHdr	Main function for Federal Smoke Cycle Header module: create Header block for Realtime Smoke Data file
fedSmokeRep	Analyze and report real-time smoke data from Federal Smoke Cycle test.
floger	Start a fast data logging operation.
hogger	Record CyFlex variables into an SQLite3 database.
hogger_out	Convert the SQLite3 database created by the hogger application into a readable format.
JEP_cost_report	Generate a report of JEP activity codes for cell classes 2-5 which includes performance, endurance, and cold cell.
keyword_init	Initialize the PAM Keywords tables in Shared Memory.
keyword_test	Check whether a keyword is a valid PAM channel keyword or PAM parameter keyword.
list_all_split_data	Print the contents of a /data/compressed/split/[variable_name] file to the screen.
locoSmokeRep	Analyze data within a logger file.
mua_specs	Harvest all of the associations of channels with MUA instance names. These associations are defined in calibration channels and in mua_specs file.
mua_status	Generate a report that summarizes the channels for which an MUA instance name has been assigned.
newtest	Produce a log file and Electronic Log entry that documents all tests and associated TRVs.
pamAgeSite	Monitor the file age of files within the hold and ready directories of the specified directory on the central node. An email is sent to sysop to notify them of the old files. A copy of the old files is attached to the email.
PAMheader	Prepare a Header file for the Performance Analysis Module (PAM) system on the CTC Network. The Header file documents the current test cell environment for PAM.
pamResend	Resend PAM datapoints to database.
pamResendSite	Resend PAM datapoints to database for a specified site.
pamStatus	Get a summary of datapoints transferred and in hold.
pamStatusSite	Get a summary of datapoints transferred and in hold.
removeLine	Remove the first line of a PAM Datapoint file with a matching string in current directory.
segment_logr	Segment floger data.
setDARTSpoint	Set a DARTS Datapoint.
setDARTStestid	Set the DARTS Test ID.
set_MUA	Set MUA in a specified calibration table.
setPAMpoint	Set the PAM Datapoint.
setPAMtestid	Set the PAM Test ID.
set_pam_group	Set a new PAM datapoint group.
show_hst_data	Print the contents of a /data/compressed/split/[variable_name] file to the screen within a certain time range.
snap_rpt	Generate a snap shot report file.
trv	Evaluate a datapoint against baseline values to determine the test readiness verification value .
trv_summ_rpt	Calculate and report average TRVs for groups of test cells.
xtr1	Extract from a single compressed history file where extracted variables are listed in an autoextract specification file.
xtrs	Extract multiple variables from compressed history files.
xtr_labels	Produce a file named “hst_labels” in a subdirectory named “extracted” under either the default /data/compressed/ directory or a directory specified in a command line argument.
xpand	Expand data from history compressed files to ASCII tabular format.